5.3 Accepting settings / Exiting menus and functions
In some menus and functions the changes made must be accepted manually
in order to save them permanently. If this does not happen, the function or the values that
existed before the change was made will be reset automatically on exiting the menu.
If an
Accept
field or the
green
function key with
Accept
is displayed in the bottom
line of the screen, you can see that the changes made must be saved manually to be
accepted.
>
By highlighting
Accept
using the
right / left arrow keys
and confirming with the
OK
key or by pressing the
green Accept
function key, the changes are saved and
you are returned to the next menu level up.
Alternatively:
>
Press the Return button.
A request appears asking whether the changes you made should be applied.
>
Use the
right / left arrow keys
to highlight
Yes
or
No
and confirm using the
OK
button.
Depending on your selection, the changes will now be saved or discarded and you are
returned to the next menu level up.
Alternatively:
>
Press the
Menu
button to leave the menu directly.
The settings that need to be saved manually will be reset in this case.
If the
green
function key with
Accept
is not displayed on the bottom line of the
screen, the changes are saved automatically on exiting the menu.
5.4 Changing a setting
You can apply settings by means of
arrow selection
, using the
selection list
, the
numeric keypad
and the
virtual keypad
. The television specifies the method that can
be used to change a highlighted setting. You can see this from the following displayed
symbols:
-
Arrow selection method
(Point 5.4.1)
Arrows are shown on the left or right edge of the highlight.
-
Arrow selection method
(Point 5.4.2)
The symbol is shown on the right edge of the highlight.
-
Numerical keypad method
(Point 5.4.3)
-
Virtual keypad
(Point 5.4.4)
The symbol is shown on the right edge of the highlight.
17
