![background image](http://html1.mh-extra.com/html/technisat/digiplus-uhd-s/digiplus-uhd-s_quick-start-manual_1069659156.webp)
156
DVR recordings
are not displayed
Selected storage medium
is not
inserted.
Insert selected storage
medium
Correct the storage
medium setting
The device cannot be
operated, or switched on
or off
Faulty data stream -->
Device blocked
Press and hold the On/
Standby button on the
remote control for approx.
5 seconds.
Remove the mains plug
for approx. 5 seconds,
then switch the device
back on
Perform flash reset:
Attention!
In doing so, all personal
settings are deleted and
the device starts with
factory settings
> Unplug the power
adapter from the device.
> Press standby and the
up arrow button on the
device at the same time
and hold them down.
> While the standby and
up arrow button are
pressed down, reconnect
the mains plug
> Keep the buttons
pressed for approx. 5 secs.
and then release both
buttons. The display
shows the message
“FLA5.”
USB device is not
detected
USB device is formatted in
the incorrect file system
Format USB device
in the FAT32 file system
Devices switches itself off
after a specific time
Auto standby function is
switched on
Check auto standby
setting and, if required,
switch off.
Summary of Contents for DIGIPLUS UHD S
