TechniSat DIGIPLUS UHD S, Quick Start Manual

Page: 126 / 160

126
Up arrow key Move picture up (only when picture height has been
enlarged)
Down arrow key Move picture down (only when picture height has been
enlarged)
OK button Scroll through zoom levels
Left arrow key Reset user-defined format setting
> To hide the format switching screen, press the Back button.
11.13 PiP / PaP function
Your device is equipped with both the PiP function (PiP = Picture in Picture), and the
PaP function (PaP = Picture and Picture). You can set which display you prefer under
Menu > Settings > Image settings > PiP / PaP mode.
See also the PiP / PaP section of the instruction manual.
The PiP / PaP function is not available for UHD broadcasters.
11.13.1 Calling up the PiP / PaP function
> Press the
PiP / PaP
button to switch on the PiP or the PaP function.
11.13.2 Swapping PiP / PaP pictures
> Press the Back button to toggle between the pictures. This toggles between
PiP / PaP and the main picture.
11.13.3 Exiting the PiP / PaP function
> You can exit the PiP or the PaP function both by pressing the PiP / PaP
button and by pressing the TV/Radio button.
11.14 Sleep timer
You can set the switch-off time of your TV using the sleep timer.
>
You can set the sleep timer by pressing the Sleep timer button a number of
times (15 minutes to 120 minutes), or switch it off.
After reaching the set time, the DIGIPLUS UHD S automatically switches to
standby mode.
Due to the new Europe-wide energy saving regulations, the device
automatically switches to standby if no operation has been carried out for 3
hours. This function can be configured under Menu> Settings > Basic settings
> Auto standby.