12
CONFIGURATION
BATTERY SAVING AND TIMER OFF
____________________________________
VIDEO IN AND HDMI OUT
_________________________________________________
Volume selection is
immediately active,
press “ENTER” for the
Display configuration
and other important
settings
Choose “BATTERY SAVING”
from the volume screen. In ON mode,
if no key is pressed, after 30 seconds,
the display brightness is reduced and
after 5 minutes the meter automatically
turns off. press any key to temporarily
reset the battery save mode.
Touch “CONFIGURATION MENU” then
“METER” in the volume screen and set the
“TIMER OFF” value required. The meter
will turn off after 5, 10, 15 or 30 minutes of
inactivity. Press any key to interrupt the
automatic turn-off.
Settings for battery save mode.
• “HDMI OUT” (connector 2): Connect an HDMI cable to automatically send the TFT
monitor pictures to a TV or video projector. The video will only be available on an
external display;
• “VIDEO IN” (connector 7): Select “EXT” to visualize an external video source.
