Polarization
>
Use the
up/down arrow
keys to mark the entry
Polarization
.
>
Use the
OK
key to enter the polarisation plane (
h
orizontal or
v
ertical) on which the
desired programme is broadcast.
Symbol rate
The symbol rate indicates the volume of data transmitted per second. An example might be
27500, indicating transmission of 27500 symbols per second.
>
Use the
up/down arrow
keys to mark the entry
Symbol rate
.
>
Use the
numeric key pad
to enter the correct symbol rate.
>
Once you have entered all the information, start the search by using the
up/down
arrow
keys to mark the entry
Start search
.
>
Confirm with the
OK
key.
Please note any notes and information displayed on the screen.
7.7.4 Channel/Programme
If a channel cannot be found by means of any of the first three search modes, it may be
necessary to enter a programme-specific Service-ID-Number. This number will be obtainable
directly from the service provider/broadcaster, or from the Internet.
Select the menu
>Search>Program
.
>
Use the
up/down arrow
keys to mark the entry
Program
.
>
Confirm with the
OK
key.
The menu
>Search>Program
will be displayed.
This menu differs from the
Transponder
menu only in terms of the list item
Service ID
.
>
Proceed as described in Point 7.7.3 above.
>
Use the
up/down arrow
keys to mark the entry
Service ID
.
>
Use the
numeric key pad
to enter the Service ID number.
7.8 Activate factory settings/change data channels
You may at any stage revert to the original default settings for the LNB, as set in the factory.
You may also wish to delete the programme list, which may be outdated, completely before
initiating a new search. Please note that, if you delete all programmes from memory, you will
then have to initiate a search, and you will have to copy your selected programmes from the
Total List into the User List.
>
Use the
Menu
key to display the
Main Menu
.
36
bed_anl_DigiBox_Cryptoworks_englisch.qxd 04.07.01 14:20 Seite 36
All manuals and user guides at all-guides.com
all-guides.com
