>
Use the
up/down arrow
keys to select the entry
Settings
.
>
Confirm by pressing the
OK
key.
The menu
Settings
will be displayed.
>
Now use the
up/down arrow
keys to select the entry
LNB Settings
>
Confirm by pressing the
OK
key.
The menu
Settings LNB
will be displayed.
The following selections can be made in this sub-menu:
5.4.1 Switching DiSEqC on or off
DiSEqC (
D
igital Satellite
Eq
uipment
C
ontrol) is a digital signal that can control the functions
of DiSEqC-compatible components via the antenna connection.
If your external installation features DiSEqC components, you should enable the DiSEqC
control function:
>
When this entry is highlighted, use the
OK
key to switch the
DiSEqC
function
on
or
off
.
5.4.2 Adjusting the Switching Matrix and LNB Properties
The menu reflects the four switching criteria of the DiSEqC control.
Your receiver is pre-programmed to receive ASTRA broadcasts on switch setting A/A, and
EUTELSAT signals on setting B/A of a Multiswitch. Should the switching matrix of your exter-
nal receiving unit be set up differently, or should you wish to receive satellite signals other
than those mentioned, you can adjust the receiver settings as follows:
>
Use the
up/down arrow
keys to select the DiSEqC switch position (1-4) that you
wish to use for allocation to a satellite (e.g.
A/B 3 No Satellite
), and highlight the
appropriate entry.
>
Press the
OK
key to confirm.
A list of several satellites will be displayed, from which you can make your selection.
>
Use the
up/down arrow
keys to select the appropriate satellite.
Pressing the
up/down arrow
keys will move the marker by one line at a time, up or
down, while the
left/right arrow
keys will take you to the previous or following
pages respectively.
16
bed_anl_DigiBox_Cryptoworks_englisch.qxd 04.07.01 14:20 Seite 16
All manuals and user guides at all-guides.com
all-guides.com
