TechnipFMC Proline Promass F 500, Operating Instructions Manual

Page: 184 / 292

Commissioning Proline Promass F 500 EtherNet/IP
184
Assign SSID name →  184
SSID name →  185
Connection state →  185
Received signal strength
→  185
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry / User
interface
Factory setting
WLAN – Switch WLAN on and off. • Disable
• Enable Enable
WLAN mode – Select WLAN mode. • WLAN access
point
• WLAN Client
WLAN access point
SSID name The client is activated. Enter the user-defined SSID
name (max. 32 characters). – –
Network security – Select the security type of the
WLAN network. • Unsecured
• WPA2-PSK
• EAP-PEAP with
MSCHAPv2
• EAP-PEAP
MSCHAPv2 no
server authentic.
• EAP-TLS
WPA2-PSK
Security identification – Select security settings and
download these settings via
menu Data management >
Security > WLAN. • Root certificate
• Device certificate
• Device private key –
User name – Enter user name. – –
WLAN password – Enter WLAN password. – –
WLAN IP address – Enter IP address of the device
WLAN interface. 4 octet: 0 to 255 (in
the particular octet) 192.168.1.212
WLAN passphrase The WPA2-PSK option is
selected in the Security type
parameter.
Enter the network key (8 to 32
characters).

The network key
supplied with the device
should be changed
during commissioning
for security reasons.
8 to 32-digit
character string
comprising numbers,
letters and special
characters Serial number of the
measuring device
(e.g. L100A802000)
Assign SSID name – Select which name will be used
for SSID: device tag or user-
defined name. • Device tag
• User-defined User-defined