background image

www.technimount.com

BP71 UG 202108-01

27

Return to Table of Contents

WARRANTY

WARRANTY POLICY

This statement constitutes TECHNIMOUNT’s entire warranty policy with regards to the TECHNIMOUNT Products.

TECHNIMOUNT MAKES NO OTHER WARRANTY OR REPRESENTATION NEITHER EXPRESSED NOR IMPLIED, EXCEPT AS 

SET FORTH HEREIN. THERE IS NO WARRANTY OF MERCHANTABILITY AND THERE ARE NO WARRANTIES OF FITNESS 

FOR ANY PARTICULAR PURPOSE. IN NO EVENT SHALL TECHNIMOUNT BE LIABLE HEREUNDER FOR INCIDENTAL OR 

CONSEQUENTIAL DAMAGES ARISING FROM OR IN ANY MANNER RELATED TO SALES OR USE OF ANY SUCH EQUIPMENT.

TECHNIMOUNT E.M.S. Holding Inc. (TECHNIMOUNT) guarantees to the original “Purchaser” of the “Hardware” with 

which this “Limited Warranty” is included that the Hardware will be free from ”Defects” in workmanship and materials 

under normal use for a “Warranty Period”, one (1) year from the date that the Hardware was first purchased by 

the  Purchaser.  During  the  Warranty  Period,  the  Hardware  will  be  repaired  or  replaced  according  to  the  “Limited 

Warranty” without charge to the Purchaser for either parts or labor. The parts may be repaired or replaced with either 

new or refurbished parts. The product may be replaced for a new or refurbished product. For this Limited Warranty 

“refurbished”  means  parts  and  products,  which  have  been  returned  to  factory  specifications.  If  the  Hardware  is 

repaired or replaced within the Warranty Period, the greater of the remaining warranty period will apply or three (3) 

months from the date of repair/replacement. If the Hardware is repaired or replaced after the Warranty Period has 

expired, the Warranty Period for the repair or replacement will expire three (3) months after the date of repair or 

replacement. 

LIMITED RESPONSIBILITY AND WARRANTY

The Limited Warranty does not apply to normal wear that should result from normal use. It does not apply when the 

Hardware or any component is opened, disassembled, or repaired by someone not authorized by TECHNIMOUNT and 

does not cover repair or replacement of any Hardware or part thereof damaged by neglect, misuse, moisture, liquids, 

exposure to heat, accidents, abuse, and non- compliance with the instructions for installation and use provided with 

the Hardware. The Limited Warranty does not cover physical damage to the surface of the Hardware, and the decision 

to repair, replace or refuse the coverage is final and its sole discretion of TECHNIMOUNT, and is made without any 

compensation or obligation from TECHNIMOUNT.

The hardware, or product defined as a mounting or bracket system for clipping and attaching medical equipment is 

specifically designed to fill this requirement. Any other use will void the warranty and TECHNIMOUNT will not be held 

liable on any claim if the product is modified or adapted for use.

Technimount  products  are  intended  to  retain  a  medical  device  in  place  in  the  case  of  a  single  crash  impact.  A 

Technimount product must NOT be used again if it was involved in a crash. The product MUST be replaced. If the 

Purchaser uses a Technimount product following a crash, it is at the Purchaser’s own risk and Technimount will not be 

held liable. 

INTERNATIONAL WARRANTY CLAUSE

This  warranty  reflects  Canadian  domestic  policy.  Warranty  outside  Canada  may  vary  by  country.  Please  contact 

TECHNIMOUNT Customer Service for more information.

Summary of Contents for PRO 71 Series































Reviews: