PG 11
The Grill Tray or Oven Shelf can be located in any of the five height positions in the upper or
lower oven.
Refer to the ‘Cooking Guide Table’ for the recommended shelf position. When fitting the trays or
shelves, ensure they are fitted between the two wires that are closest together as shown below.
Oven Shelves have a stop so that they are not fully withdrawn by accident. To fully remove the
Oven Shelves, lift the front of the shelf slightly and withdraw fully from the oven. Note that the Grill
Tray does not have a stop position and can be fully withdrawn without interruption, so be careful
not to accidentally fully withdraw the tray.
Positioning the oven trays & shelves
USE AND CARE
Locking pin
To remove the Oven Shelf
Support, push down on the
wire below the locking pin,
pull away from the oven wall
until you can release the top
of the support from the holes
in the oven wall. Replace in
reverse procedure.
Fit Trays and
Shelves between
bars as shown
right
Oven Shelf fitted to chrome wire Shelf Support
Summary of Contents for TGDO84TBK
Page 1: ...USER GUIDE M U L T I F U N C T I O N D O U B L E O V E N T G D O 8 4 T B K TECHNIKA COM AU ...
Page 2: ......
Page 35: ...PG 35 NOTES ...
Page 36: ...PG 36 NOTES ...
