17
461308366 10/2014
INSTRUCTIONS FOR THE INSTALLER
17
16
14
15
POSITION (
fig
. 14)
The appliance should be positioned in good light and
free from draughts. Any adjoining wall surface situated
within 200 mm from the edge of any hob burner
must be a suitable non-combustible material for a
height of 150 mm for the entire length of the hob. Any
combustible construction above the hotplate must be
at least 750 mm above the top of the burner and no
construction shall be within 450 mm above the top of
the burner.
Where a combustible surface adjacent to the cooker
is less than 200 mm from the nearest burner it may
be protected by a non-combustible protective layer in
accordance with AS5601. The protection must ensure
the surface temperature of the combustible surface
does not exceed 65º C above ambient.
LEVELLING THE COOKER
• Adjustable feet,
This model has very slight
adjustable feet which can go from a heght of 900 -
920mm It has full plinths on both sides.(fig.15)
• Backguard
. The cookers which are equipped
with this accessory, leave the factory with this part
inserted inside the packaging. In order to install the
backguard, it is necessary to loosen the screws
positioned on the back of the hob and then to fix the
backgaurd as indicated in figure 17.
OVERALL DIMENSIONS
(fig. 15)
900 - 920H x 900W x 600D mm
It is essential to check dimensions of physical product
when measuring for installation and before doing
any cut outs.