15
461308366 10/2014
INSTRUCTIONS FOR THE USER
OVEN SIDEWALL GRIDS (fig. 11)
To allow for a better cleaning of the side grids, you can
extract them this way:
1. Push with a finger on the last of the slots to release
the grid from its hold.
2. Lift it towards the top and extract the grid.
To put them back into place, reverse the order of this
operation.
OVEN DOOR REMOVAL
(fig. 12)
The oven door can be removed to give easier access
to the oven when cleaning.
To remove, proceed as follows:
• Open the oven door and insert rivet or nail (R) in
the hole (F) of the hinge.•
Partially close the door, forcing it upwards at the
same time to free stop tooth and hinge sector.
• Once the hinge is free, pull the door forwards tilting
it slightly upwards to free sector.
• To reassemble proceed in the reverse order, paying
attention to the correct position of sectors.
REPLACING THE OVEN LAMP
Ensure the appliance is switched off before replacing
the lamp to avoid the possibility of electric shock..
In the event one or both oven lamps need replacing, the
new lamps must comply with the following requisites:
15 W - 230 V~ - 50 Hz - E 14 - and must be resistant to
high temperature (300°C).
The appliance can have two different types of lamp
holder:
• Lamp holder
: Draw out the side guide rails as
described above.Then, remove the glass protection
cap (V) from the bulb socket, lifting it with a
screwdriver placed between the cap and the oven
wall and replace the lamp (L). Fit the accessories
back in reverse order.
12
13
11
Maintenance ScheduleThe appliance should be checked
by an authorised person every year to ensure the safe
operation of the appliance. As part of the inspection, the
authorised person should also check that the wall brac-
kets are engaged and securely mounted to the wall. This
maintenance is not covered by warranty
