Operation
25
Timer
By using the timer you can switch your receiver on and off at
certain times, for instance to enable recording with a
videocassette recorder. The device then automatically switches
on from standby.
Adding programme to timer list
The timer function is accepted in the timer list via the EPG.
1.
Open the EPG and press the
blue colour button
.
2.
Select the desired channel on the left window half using the
Arrow button
=
or
=
.
The contents of the right window half adjusts automatically.
3.
Press the
Arrow button
to skip to the right window half with
the selection bar.
4.
Select the programme using the
Arrow button
=
or
=
.
5.
By means of the four colour buttons you can select a different
period.
red: two hours back
green: two hours ahead
yellow: one day back
blue: one day ahead
NOTE:
The period selected is displayed in the upper area of the right
window half. The colour buttons can be pressed again.
6.
Press the
OK button
to add the programme selected to the
timer.
Behind the programme selected a small clock symbol is shown.
7.
Press the
Exit
or
EPG
button to close the electronic programme
guide again.
Technika STB 905.book Seite 25 Mittwoch, 27. September 2006 8:21 08
