manualshive.com logo in svg

Technika STB 9005, Operating Instructions Manual

Share
Download
Technika STB 9005 Operating Instructions Manual Download Page 11

Operation

11

5. Connecting the receiver

Inserting the battery into the remote control

The battery (type CR2025 / 3 V) is already inserted in the 
remote control. It is covered by an insulating plastic separator to 
avoid premature discharge of the battery.

1.

To remove the battery, extract it from the remote control as 
showed above.

2.

Simply re-insert the battery compartment into the remote 
control. 
The remote control is now ready for use.

Connecting the receiver

   

Note:
Observe the connection diagram, see page 13.

 

Connection to an antenna

Connect the antenna via a (not supplied) coaxial cable to the 
receiver. First connect the coaxial cable to the antenna and 
then to the 

RF IN

 socket of the receiver.

Caution!
Please be sure that all devices are switched off before you 
connect them. Only plug in the power supply when all other 
connections have been established. By this, possible damage 
is avoided.

Technika STB 905.book  Seite 11  Mittwoch, 27. September 2006  8:21 08

Summary of Contents for STB 9005





































Reviews:

No comments

Brands by name

Popular brands

Load more brands