21
Factory reset
You can restore the default settings for your
box to the original factory values:
1. Press the
MENU
button.
2. Press the
▼
button to select the ‘Install’
option.
3. Press the
◄
and
►
buttons to select the
‘Factory Reset’ option.
4. Press
OK
to begin.
5. You are asked to confirm that you want to
proceed. Press the
OK
or
BACK
button if
you do not want to re-tune, otherwise
Note: You should re-tune your box
if you move home.
Note: You should re-tune your box
periodically because new channels
may become available.
CAUTION: RETURNING THE
BOX TO ITS FACTORY DEFAULT
CLEARS ALL SETTINGS.
THE PIN IS RESTORED TO THE
DEFAULT ‘0000’ VALUE
Note: To prevent accidental
erasure,factory reset does not
reset the Channel Zero settings in
your box.
To perform a full reset that includes
also the Channel Zero settings,
press the following sequence of
buttons: MENU, 2, 7, 1, 8, 2, 8, 4,
5, 9, 0.
The box will go into standby
automatically
Operating the box
3. Press the
OK
button to begin.
4. You are asked to confirm whether you
want to proceed. Press the
OK
or
BACK
button if you do not want to re-tune,
otherwise press
►
and then
OK
to
confirm.
5. The box searches for and displays all the
available TV and radio channels.
6. Once the automatic search has been
completed, all channels are stored and the
first available channel is shown.
Version
The Version menu shows hardware and
software information.
To see the version number:
1. Press the
MENU
button, then press the
▲
/
▼
/
◄
and
►
buttons to navigate to
press
►
and then
OK
to confirm.
After pressing
OK
, a prompt is shown
asking for a password. Enter the correct
password to perform the factory reset (default
password is 0000).
Summary of Contents for Freeview STBHDIS2010
Page 1: ...Freeview HD Set Top Box Model STBHDIS2010 ...
Page 2: ......
