Technika CP750SS, Instructions For Use And Installation

Page: 6 / 9

necessary.
The connection to the mains is carried out as follow:
If not provided, connect a plug for the electrical load indicated on the
description label. Where a plug is provided, the cooker hood must be
installed in order that the plug is easily accessible.
An Omni polar switch with a minimum aperture of 3mm between
contacts, in line with the electrical load and local standards, must be
placed between the appliance and the network in the case of direct
connection to the electrical network.
●
The minimum distance between the trivets on the cooker top and the
lowest part of the cooker hood must be at least 650mm and the highest
750mm .
Do not connect the cooker hood exhaust to the same Flue used to
circulate hot air or for evacuating fumes from other appliances generated
by other than an electrical source.
Before proceeding with the assembly operations, remove the anti-grease
filter(s) so that the unit is easier to handle.
In the case of assembly of the appliance in the suction version prepare the
hole for evacuation of the air.
USE AND MAINTENANCE
● It is recommended to operate the appliance prior to cooking.
It is recommended to leave the appliance in operation for15 minutes after
cooking is terminated in order to completely eliminate cooking vapors
and odor.
The proper function of the cooker hood is conditioned by the regularity of
the maintenance operations, in particular, the grease filters.
● The anti-grease filters capture the grease particles suspended in the air,
and are therefore subject to clogging according to the frequency of the
use of the appliance.
In order to prevent fire hazard, it is recommendable to clean the Grease
IEC227
L=live Brown
N=neutral Blue
E=earth Green/Yellow