Technics ST-GT1000, Service Manual

Page: 13 / 64

7 7
7 7
7
Tuning
FM
PUSH OPEN
PRIMARY/
SECONDARY
AUTO TUNING
STEREO
SECONDARY SERVICE
1 2
4 3
5
1
2
FM AM
DAB
3
TUNING
ATUO/MANUAL
MHz
AUTO TUNE
MANUAL TUNE
4
SERVICE-
FREQUENCY
MHz
5
SERVICE- FREQUENCY
TEXT
Use to tune to DAB services and FM and AM radio stations.
Preparation:
Press [PUSH OPEN] to open the front panel.
Press [ /I].
The unit comes on.
Press [DAB], [FM], or [AM] to select the band.
Press [TUNING AUTO/MANUAL] to select the
method of tuning.
AUTO TUNE: Enables automatic tuning to stations with a
strong enough signal. (The “AUTO TUNING”
indicator lights.)
MANUAL TUNE: Select this method if AUTO tuning cannot
tune to a particular station.
Turn [FREQUENCY] to tune to a broadcast.
Clockwise: increases frequency
Counterclockwise: reduces frequency
In AUTO mode: When the dial is turned the frequency starts
changing automatically and stops when a
broadcast is found.
In MANUAL mode: The frequency changes when the dial is
turned.
The “STEREO” indicator lights during reception of stereo
broadcasts.
When a DAB ensemble is found, the ensemble’s number
(e.g. 13A) is displayed in the top left corner of the display.
(DAB only)
Turn [SERVICE] to select a service.
You can select the primary services within the current ensem-
ble.
The “SECONDARY SERVICE” indicator lights when a sec-
ondary service is available (see “Tuning to secondary ser-
vices”).
“DATA” lights when data services are available (see “Using
data services”).
5
4
3
2
1
Tuning to secondary services (DAB)
A
When the “SECONDARY SERVICE” indicator is on
Press [PRIMARY/ SECONDARY].
The secondary services are selected each time the button is
pressed. The primary service is returned to after the last secondary
service.
After use
Press [ /I] to turn the unit off.
A
PRIMARY/
SECONDARY
“NOW TUNING” is displayed when
manual tuning DAB.
Changes to “TUNED” when an FM
or AM station is found.
(DAB only)
(DAB only)
Display example
If noise is excessive in FM
Press [FM].
This mode improves sound quality if there is a lot of noise but
broadcasts are heard in monaural. (“M” lights on the display.)
Press again to cancel.
The “ ” display indicates zero.