89
(Continued)
Playback does not start.
•
Depending on your environment or connected
devices, it may take some time.
•
Check to see if the format of the file is supported.
For supported formats, refer to “File format”.
(
⇒
107)
The unit turns to standby mode automatically.
•
Is the auto off function turned on? (
⇒
•
This unit may turn to standby mode simultaneously
with the connected device with the system control
function. (
⇒
83)
The settings are reset to the factory defaults.
•
Updating the firmware may reset the settings.
The system control function is not working.
•
Use the system connection cable supplied with the
connected device.
•
Connect the system connection cable to the
system terminals (CONTROL). (
⇒
82)
•
Connect Technics device supporting system
control function (Stereo Integrated Amplifier,
etc.) to this unit. For details, refer to the following
website.
www.technics.com/support/
Summary of Contents for SL-G700
Page 1: ...Operating Instructions Network Super Audio CD Player SL G700 ...
Page 21: ...21 Continued 04 Measure the output signal when speakers are connected and correct its output ...
Page 58: ...58 Operations during playback Stop Pause Podcasts Press again to resume Skip ...
Page 64: ...64 Note Depending on the country or region playback may not be available ...
