Technics SH-1000R, Operating Instructions Manual

Page: 19 / 104

09
English
(19)
Fit the dust cover
1
While holding the dust cover
from both sides, put it in place by
aligning its four corners with the
four corners of the unit.

When removing, lift the dust cover
straight up.
Attention
 Do not use the dust cover if you have a second tone arm connected.

Remove the dust cover while playing.
145.7 mm
137.2 mm
37.4 mm
5 mm
5 mm
90 mm
381.9 mm
202.7 mm
179.2 mm
5 mm
Dust cover
The combination of the following tonearm base
and tone arm will cause interference with the dust
cover. Therefore, remove the dust cover.
Tonearm base
Tone arm (Short-type)
Manufacturer Model number
SH-TB10JL1-S JELCO SA-250
 
Clearance for installing the dust cover ( : Clearance)