Page
3
of
5
•
In case of a storm, it is recommended that you unplug the decoder from the mains and from the other connected devices (TV set,
antenna, SPDIF and Ethernet devices).
•
Leave the mains socket accessible so that you can unplug the set quickly.
The power supply unit serves as disconnect device. Be
sure that the mains supply socket outlet you use is easily accessible and located as close to the product as possible. The power
connections to the product and the mains supply socket outlet socket must be accessible at all times, so that you always can disconnect
the product quickly and safely from the mains supply.
Connecting to the mains supply
•
This equipment is designed to operate at 100-240V AC, 50/60Hz.
•
If you are in any doubt about the mains plug or connection, please consult the Customer Service.
•
Only the power adapter supplied with the decoder must be used.
Remote Control Unit
Your remote control is specifically designed to be used with your decoder and it requires some specific batteries (See the chapter Technical
Specifications). Insert batteries correctly. There may be a risk of explosion if the batteries are incorrectly inserted. Do not attempt to
recharge disposable or non-reusable batteries.
The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. The batteries
use some hazardous substances which are very polluting for the environment. Do not throw them out. Remember to dump them in collection
points.
Technical Specifications
Operating Voltage
100-240 VAC ~ 50/60 Hz
Typical Power Consumption
< 12W MAX
Active standby Power Consumption
< 2W
Deep standby Power Consumption
<0,5W
Weight
260g
Dimension (Bigger diam x Top diam x H)
130 x 130 x 29.9mm
Operating Temperature Range
5°C to +45°C
Storage Temperature Range
-25°C to +55°C
Remote Control Battery Type
2 batteries AAA 1.5V
Conditional Access
NA
External Power Supply Output Voltage /Current
12V DC /1A
Set Top Box Input Voltage /Current
12V DC /1A
Buttons and Physical Connections
9 10
2
1
DC Jack
2 Pins female standard Jack plug
2.5mm-6.3mm 12V /1A
2
HDMI
HDMI OUT
3
Ethernet
RJ-45 /IEEE 802.3 - Unshielded
4
Reset Button
5
Standby Button
6
Pairing Button
7
USB side
USB 2.0 (Type A)
