![Technicolor UIW4059MIL Quick Start Manual Download Page 2](http://html.mh-extra.com/html/technicolor/uiw4059mil/uiw4059mil_quick-start-manual_1068006002.webp)
Page
2
of
5
UIW4059MIL
SAFETY INSTRUCTIONS AND REGULATORY NOTICES
BEFORE YOU START INSTALLATION OR USE OF THIS PRODUCT, CAREFULLY READ ALL SAFETY INSTRUCTIONS
Notice to consumers
UIW4054MIL is an OTT/Pay-Tv Set-Top Box receiving digital signals from your service provider through Wi-Fi or Ethernet cable connection
and delivers programs in Standard-Definition (SD), High-Definition (HD) video formats (up to 1080p/60) and Ultra-High-Definition (UHD)
video formats (up to 2160/60p). You must have an UHDTV to display UHD programming. Programming must originate in UHD format and
be broadcast in UHD format.
Using equipment safely
Your Equipment has been designed to meet international safety standards, but you must take care if you want it to perform properly and
safely. It is important that you read this booklet completely. If you have any doubts about the installation, operation, or safety of this
Equipment, please contact your supplier.
Ensuring optimum performance
•
Leave 7cm to 10cm around the decoder to ensure that proper ventilation gets to the decoder.
•
Do not store your decoder on its side
•
To clean the decoder, use a dry, clean soft cloth with no cleaning solvent or abrasive products. Clean the ventilation openings regularly.
Connecting to the Television distribution
Equipment connected to the protective earth of the building installation through the mains connection or through other equipment with a
connection to protective earth and to a cable distribution system using coaxial cable, may in some circumstances create fire hazard.
Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain
frequency range (galvanic isolator, see EN 60728-
11 or equivalent).”
To avoid the risk of electric shock
•
Disconnect the decoder from the mains supply before you connect the decoder to (or disconnect it from) any other equipment.
Remember that contact with AC mains can be lethal or cause severe electric shock.
•
Never remove the decoder’s cover. Should the decoder fail, contact the Customer Service to arrange repair or service.
•
Never allow anyone to push anything into holes, slots or any other opening in the case.
•
Do not block the decoder’s ventilation slots; never stand it on soft furnishings or carpets.
•
Do not put anything on the decoder which might spill or drip into it (e.g. Lighted candles or containers of liquids). Do not expose the
decoder to dripping or splashing. If an object or liquid enters inside the decoder, unplug it immediately and contact the Customer
Service.
•
Do not store the decoder in excessively hot, cold, or damp conditions. The decoder is intended to operate at an ambient temperature
of less than 45
degrees Celsius and a maximum humidity level of 75%.