ATM COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
75
atm qosbook ctdadd
Add a new connection traffic descriptor.
SYNTAX:
atm qosbook ctdadd
name = <string>
conformance = <{UBR|CBR|VBR|UBR.1|UBR.2|
UBR.mdcr|CBR.1|VBR.1|VBR.2|VBR.3|VBR.c|VBR.nt|
VBR.t|GFR.1|GFR.2}>
[peakrate = <number{0-27786}>]
[sustrate = <number{0-27786}>]
[maxburst = <number{48-12240}>]
[minrate = <number{0-27786}>]
[maxframe = <number{0-255}>]
[celldelay = <number>]
[realtime = <{enabled|disabled}>]
[framediscard = <{enabled|disabled}>]
where:
name
The name for the new CTD entry.
REQUIRED
conformance
The ATM service conformance definition.
REQUIRED
peakrate
The peak rate (in kilobits per second). Use '0' to indicate
linerate for UBR.
OPTIONAL
sustrate
The sustainable rate (in kilobits per second). (VBR only)
OPTIONAL
maxburst
The maximum burst size (in bytes). (VBR or GFR)
OPTIONAL
minrate
The minimum rate (in kilobits per second). (UBR.m or GFR)
OPTIONAL
maxframe
The maximum frame size (in bytes). (GFR only)
OPTIONAL
celldelay
Cell delay variation in tenths of microseconds.
OPTIONAL
realtime
Enable/disable realtime traffic (VBR only).
OPTIONAL
framediscard
Enable/disable frame discard.
OPTIONAL
nickdj.co.uk