IP COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
561
ip Commands
Add an entry to the ARP cache of a broadcast IP
Modify autoIP trace configuration
Creates a new autoIP interface.
Select and assign a link-local address to an
Configures an autoIP interface.
Deletes an existing autoIP interface.
Release the link-local address for the given
Display/Modify global IP stack configuration.
Send HTTP probe to measure the round trip
time taken to connect and access
Display/Modify IP stack trace configuration.
Flush all static IP parameters. Dynamic info (e.g.
Modify an IP interface configuration.
Wait for a status change of an IP interface.
Assign an IP address to an IP interface.