IP COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
579
ip debug traceconfig
Display/Modify IP stack trace configuration.
SYNTAX:
ip debug traceconfig
[input = <{none|label|-telnet|-host|-
broadcast|all}>]
[forward = <{none|label|-telnet|-host|-
broadcast|all}>]
[output = <{none|label|-telnet|-host|-
broadcast|all}>]
[drop = <{none|label|-telnet|-host|-broadcast|
all}>]
[path = <{none|label|-telnet|-host|-broadcast|
all}>]
[mode = <{line|dump}>]
[arp = <{none|all}>]
where:
input
Define the packets that will be traced.
OPTIONAL
forward
Define the packets that will be traced.
OPTIONAL
output
Define the packets that will be traced.
OPTIONAL
drop
Define the packet drops that will be traced.
OPTIONAL
path
Define the packet that will be path-traced.
OPTIONAL
mode
Packet dump method.
OPTIONAL
arp
Define the arp packets that will be traced.
OPTIONAL
nickdj.co.uk