Technicolor TG587n v3 Setup And User Manual Download

Page: 32 / 98

3 MANUAL INSTALLATION

DMS-CTC-20101206-0017 v1.0

3.4 Configure the Technicolor Gateway

Introduction

If your service provider did not preconfigure your Technicolor Gateway, you may have to configure the Technicolor
Gateway via its Graphical User Interface (GUI).

Requirements

JavaScript must be enabled on your web browser (this is the default setting). For more information, consult the help of your
web browser.

Procedure

Proceed as follows:

Open your web browser.

The Technicolor Gateway informs you that you have not yet configured your Technicolor Gateway.

If this window does not appear, browse to http://dsldevice.lan or to the IP address of your Technicolor Gateway (by
default: 192.168.1.254) and click

Technicolor Gateway

on the menu on the left-hand side.

Click

Setup my Technicolor Gateway

The

Easy Setup

wizard appears. This wizard will guide you through the configuration of your Technicolor Gateway. Click

Next

and follow the instructions.

Summary of Contents for TG587n v3



































































































Search results

Summary of Contents for TG587n v3

Reviews:

Related manuals for TG587n v3

Brands by name

Popular brands

Technicolor TG587n v3, Setup And User Manual

Search results

Summary of Contents for TG587n v3

Reviews:

Related manuals for TG587n v3

Brands by name

Popular brands