background image

Advanced 
 

6.9

 

Firewall 

6.9.1

 

MAC Filter 

This page allows you to set up a list of MAC addresses which will be allowed or 
restricted to access the Internet.  
To access the MAC Filter page, click ADVANCED > Firewall > MAC Filter or click the 
MAC Filter button. 

 

MAC Address Control — Check this box to enable the MAC filter function. 
Control Action — Select Allow to allow all clients to access the Internet except those 
MAC addresses specified below or select Deny to restrict all clients to access the 
Internet except those MAC addresses specified below. 
Click the Apply button to save and activate the MAC filter or click the Cancel button 
to discard your changes. 
MAC Address — Enter the MAC address of the device you want to allow or deny 
access to the Internet. To use the MAC address of the DHCP client, click the Clone 
button. The MAC address is automatically copied to the MAC address field. Click the 
Add button to add the MAC address to the filter list. 
The MAC ADDRESS CONTROL LIST displays the MAC address of the devices that are 
either allowed or denied access to the Internet. To remove an entry from the list, click 
the corresponding       button.  

6.9.2

 

IP Filter 

This page allows you to create filter rules to control outgoing traffic to the Internet 
based on a range of IP addresses and their protocols. 
To access the IP Filter page, click ADVANCED > Firewall > IP Filter or click the IP Filter 
button. 

 

Wireless ADSL2+ Gateway 

 

   

61 

Summary of Contents for TD5130











































































































Reviews: