manualshive.com logo in svg

Technicolor Delivery Technologies ST4318, User Manual, Page: 56 / 76

Share
Download
Technicolor Delivery Technologies ST4318 User Manual Download Page 56

54Mbps 802.11g Wireless LAN Card 

48

 

Card Not Detected 

If the Wireless LAN Card is not detected by Windows, try the following: 

•

 

Make sure the Wireless LAN Card is properly inserted in the computer. 

•

 

For PC Card, make sure the slot

 

in your computer is working. 

•

 

Contact your dealer for additional testing if there is a hardware problem with the 
Wireless LAN Card. 

Cannot Connect to Another Wireless LAN Card 

If you cannot make a connection to another Wireless LAN Card from your computer, it could 
be due to one of the following reasons: 

•

 

Incorrect SSID. Make sure the SSID is the same for all computers that have a 
Wireless LAN Card. 

•

 

Changes are not being recognized by your computer. Restart your computer. 

•

 

If in Ad-Hoc mode, make sure the 

Log on to Windows NT domain 

check box is 

not selected in the 

Client for Microsoft Networks Properties 

dialog box in the 

Network Configuration 

tab. 

•

 

Incorrect IP Address or Subnet Mask. Check these settings in the 

TCP/IP  

Properties 

dialog box in the 

Network Configuration 

tab. 

Summary of Contents for ST4318













































































Reviews:

No comments