P-6
Connecting USB Flash Drive & SD Card Inputs
There are input jacks for a USB flash drive and SD card on the rear panel of the speaker. Simply connect the USB
flash drive or SD card into their respective input jacks and use the input mode selector button and Mode button to
choose the corresponding input. Be sure that the volume knobs on the powered speaker are turned down at first
and then slowly raise the volume to prevent damage the speakers or any of your other equipment.
DO NOT ATTEMPT TO CONNECT THE USB INPUT TO A SMART PHONE, COMPUTER OR LAPTOP.
The Input selector (18) should be set to the USB / SD / BLUETOOTH IN when using those inputs.
When using the USB / SD inputs the LCD Screen will light up and display information such as the track
number, track title, elapsed time and Repeat mode.
PW1610PKG
Set the
Input selector
button
to USB / SD
/ Bluetooth IN when using these inputs
Insert USB Flash Drive
(32GB max)
Insert SD Card
(32GB max)
OR
Press the MODE Selector (11) to switch
between the USB, SD and Bluetooth Inputs.
If the Display shows “Bluetooth NOLINK”
Press the Play button to begin
playing audio from the USB / SD Input
