PK15BT
4
Easy Setup Guide:
NOTE: ALL NUMBERS IN THE “EASY SETUP GUIDE” CORRESPOND TO THE CONTROLS AND INPUTS DIAGRAM
(CID) ON PAGE 3.
Powering the Unit ON
Before powering the unit ON, set volume to zero by gently turning the “Master Volume Knob” (#17) in the counterclockwise
direction until it can no longer be turned with
gentle
force. Depending on the desired power source, select either the included AC
power cable or included DC power adapter (AC works with most standard outlets whereas DC works with most car’s power). For AC
power insert the female side of the AC power cord into the “AC Power Adapter Port” (#21) and the male side into the desired
compatible outlet. For DC power, insert the female side of a DC power cord into the “Car DC Power/External 12V Input Port” (#14)
and the male side into the desired compatible power source. Then turn the device on and slowly increase the volume to the desired
level by using the “Master Volume Knob”.
USB Flashdrives/SD Cards
To play music from SD cards and USB flashdrives, set input to USB/SD by pressing the “Mode Button” (#1). Then insert a USB
flashdrive or SD card into the “USB Port/SD Reader” (#7). To select songs, use the “Previous Track Button” (#4) and “Next Track
Button” (#6). To plause and unpause playback press the “Play/Pause Button” (#5). To repeat playback press the “Repeat Button” (#2)
once to repeat a single track, twice to repeat all tracks, and three times to deselect the repeat function. Do not attempt to connect a
smart phone, computer or hard drive via this port, it only supports playback from USB flash drives.
Bluetooth
To play music off of a Bluetooth compatible device, set input to Bluetooth by pressing the “Mode Button” (#1). Using the desired
Bluetooth
device, search for the PK15BT and pair the device.
To select songs, use the “Previous Track Button” (#4) and “Next Track
Button” (#6). To plause and unpause playback press the “Play/Pause Button” (#5). Playback may also be set on the Bluetooth
compatable device paired with the unit.
1/8” AUX Inputs
To play music via the 1/8” AUX input, set input to AUX via the “Mode Button” (#1). Then, insert one side of a 1/8” to 1/8” audio
cable into the “AUX 1/8” Input Port” (#20) and the other side into the desired MP3 player. Select songs using the MP3 player
connected to the unit.
RCA Inputs
Set the input selector to AUX via the “Mode Button” (#1). Insert one side of the RCA cable into the “RCA Input Port” (#13) on the
top of the unit and the other side into the desired unit (RCA equipped computer, DVD player, TV, etc.)
Equalization
For USB flash drives and SD cards, use one of the pre-programmed digital equalization modes. To do this press the “Equalizer
Button” (#3) to select an equalization mode that produces the desired output. For all other outputs (and USB/SD), tailor output with
the “Bass Knob” (#18) and “Teble Knob” (#19) which adjusts output over a specific range.
Wired Mic Setup
Set the “Microphone Volum Knob” (#16) to zero. Insert a mic cable into the “Mic 1/4” Input Port” (#22). Slowly increase mic volume
to the desired setting. To increase mic echo, use “Mic Echo Knob” (#15). To give the microphone priority set the “Microphone
Priority Switch” (#8) to ON. Setting the “Microphone Priority Switch” to ON boosts microphone output relative to line output and is
useful for making sure music doesn’t drown out vocals and other microphone input.
Guitar Setup
Set the “Guitar Volume Knob” to zero (#9). Insert one side of a cable connected to the desired guitar into the “Guitar 1/4” Input Port”
(#10). Slowly increase the “Guitar Volume Knob” to the desired level.
