P-3
1. Input Selector Button: Press this button to set the input to AUX/LINE IN or USB/TF.
2. USB / TF Card Recorder: Press this button to record from the wired and wireless microphones onto the
USB Flash Drive or TF Card.
3. Repeat Selector: Press the REPEAT Track button to switch between repeating the CURRENT track and
repeating ALL tracks.
4. Previous Track: When in USB / TF Card Mode, press this button to go to the previous track.
5. Play/Pause: Press this button to pause the signal from the USB flash drive, TF Card Inputs.
6. Next Track: When in USB / TF Card Mode, press this button to go to the next track.
7. USB Flash Drive Input: Insert your USB flash drive into this slot. The unit will only read .mp3, .wav, .wma
files from the USB flash drive. The maximum storage size of the USB flash drive cannot exceed 16GB. Do
not attempt to connect a computer to the USB input as the speaker will not be able to connect to a
computer.
8. AUX Input: Connect your MP3 player here using the 1/8” input. Be sure the Input selector button (1) is
set to AUX/LINE IN when using this input.
9. TF Input: Insert your TF Card into this slot. The unit will only read .mp3, .wav, .wma files from the TF
Card. The maximum storage size of the TF Card cannot exceed 16GB.
10. Microphone Volume Knob: Use this knob to adjust the microphone volume levels for the microphones
connected to the MIC Input (18).
11. Microphone Echo: Use this knob to adjust the microphone’s echo.
12. Bass Knob: Use this knob to adjust the bass levels.
13. Power LED Indicator: The Power LED will illuminate red when the unit has successfully powered on. If
the Power LED fails to light up when the unit is powered on and the does not respond to the power being
turned on the unit’s fuse as probably blown.
14. Treble Knob: Use this knob to adjust the treble levels.
15. Master Volume Knob: Use this knob to adjust the volume of all Line inputs.
16. Power Supply: Connect the power cord here. The power button (21) should be set to the off position
before the power supply is connected.
17. Battery Charging Indicator: This indicator will illuminate when the battery is charging and when the
battery is fully charged.
18.
¼
” Microphone1 Input
19. DC-12V Power Supply: When using the external 12V power supply, the unit will only be able to be
power on and play audio, however it will not be able to charge the built-in battery.
20. Antenna
21. Power Switch: Before the unit is powered on, all of the level controls should be turned down all the
way. Once powered on, slowly begin to raise the levels of the inputs. This will prevent damaging both the
speakers and the amplifier.
22. LED Woofer Light Switch: Set this switch to ON to turn on the LED for the woofer. The unit must also
be powered on for the LED to function.
DJPACK2G
O
