Technica Engineering USB-100BASE-T1, User Manual, Page: 15 / 23

USB-100BASE-T1 Converter  User Manual 15
Configuration Options:
•
The “Master” button can be used to configure the BroadR -Reach port to work
in Master mode.
•
The “Slave” button can be used to configure the BroadR -Reach port to work in
Slave mode.
When new devices are connected, they are detected automatically and appear on the
drop-down list.
If you connect a new device and it doesn’t appear automatically on the list, please
press the "
↻
" button.
The Master/Slave settings for each device are kept in memory, so that when you un-
plug and re-plug them, the latest setting will be used.
Note : In a BroadR-Reach Link one device must be set as Master, the other must be set
as Slave.
On version 1.4 the user documentation is not directly linked to the “?” icon, so you will
get the following information:
Figure 4-2: Prompt for Documentation