Technibel PORTABLE SCDF32C5I, Operating Instructions Manual

Page: 8 / 84

8
EN
ADJUSTING THE fAN SPEED
HOW TO SET THE PRESENT TImE
COOLING / AUTOmATIC
DEHUmIDIfYING (DRY)
2. Press the SET H button until the present time hour is
displayed.
Press the SET M button until the present time minutes
are displayed. The display will automatically stop
flashing.
1. Press the button SEL TYPE three times.
The time indication alone flashes.
fAN ONLY
Verify that the unit is connected to the
main power and the STANDBY lamp is
light up.
1. Set the selector to COOL (symbol
on the display).
2.
Press the +/- buttons (temperature
selection) to set the desired temperature
(the temperature range is between 32 °C
max. and 10 °C min.).
THE DISPLAY SHOWS THE
SELECTED TEMPERATURE.
AFTER 5 SECONDS FROM THE
REQUIRED TEMPERATURE SETTING
THE DISPLAY WILL SHOW THE ROOM
TEMPERATURE AGAIN.
3. Press the FAN button to select the fan speed.
NOTE
C
1
3
2
2
1
1. Set the button to DRY. The icon is displayed.
2. Press the +/- buttons (temperature selection) to set the
desired temperature (the temperature range is between
32 °C max. and 10 °C min.).
THE DISPLAY SHOWS THE
SELECTED TEMPERATURE.
AFTER 5 SECONDS FROM THE
REQUIRED TEMPERATURE SETTING
THE DISPLAY WILL SHOW THE ROOM
TEMPERATURE AGAIN.
• Use DRY operation when you want to reduce the humidity
in the room.
• Once the room temperature reaches the set level, the unit
repeats the cycle of turning on and off automatically.
• During DRY operation, the fan speed is automatically
set (Remote control lamp is ON) to prevent
overcooling.
• Dry operation is not possible if the indoor temperature is
10 °C or less.
NOTE
If you want to make air circulate without any temperature
control, press button until only the fan symbol
appears on the display.
AUTOmATIC
Simply set the FAN selector to the position.A
microcomputer automatically controls the fan speed when
the AUTO mode is selected. When the air conditioner
starts operating, the fan speed varies (high - medium -
low - very low) according to the thermal load of the room.
The automatic speed is not available in FAN ONLY mode.
NOTE
mANUAL
If you want to manually adjust speed just set the FAN
selector as desired.
High speed Med. speed Low speed
NIGHT mODE / ENERGY SAvING
l
This mode enables you to save energy.
1. Set the selector to cool or dry.
2. Press the button.
3.
The mark appears on the display. Press the
button again to release the function.
What does the NIGHT mode mean?
When you select the NIGHT mode, the air conditioner will
modify automatically the set temperature after 60 minutes:
it will be raised by 1°C.
This enables you to save energy without sacrificing your
comfort.
During the NIGHT mode the internal fan speed is
automatically lowered and reduces the noise.
NOTA