6
Unit Display and Operation Button
REMOTE CONTROL receiver
This section picks up infrared signals from the remote control unit
(transmitter).
OPERATION button
When the remote control cannot be used, pressing this button enables
heating and cooling operation.
Each time this button is pressed, the type of operation conducted is indicated
by the changing color of the OPERATION lamp. Press the button and select
the lamp color that suits your preference for operation.
OPERATION lamp
This lamp lights when the system is in the continuous AUTO (red or green),
HEAT (red), DRY (orange), COOL (green) and FAN (green) mode (but no
FAN mode at M of the S/M switch on the remote control unit).
The OPERATION lamp lights up red and orange alternately when the system
is defrosting.
TIMER lamp
This lamp lights when the system is being controlled by the timer.
LED CLE
AN
lamp
This lamp lights during operation in the UV
anti-bacterial mode.
The unit’s display lamps are dimmed during operation in the NIGHT
SETBACK mode.
Avoid using radio equipment
such as mobile phone near
(within 1 m) the remote
control receiver. Some radio
equipment may cause
malfunction of the unit.
If the trouble happens,
disconnect power and restart
the air conditioner after a few
minutes.
IMPORTANT
REMOTE CONTROL receiver
Cooling operation
(green)
Heating operation
(red)
Stop
(lamp off)
NOTE
OPERATION
lamp
T
IM
ER lamp
(ON/OFF) button
LED CLE
AN
lamp
