Technibel CA 250 X5 TA Series, Operating Instructions Manual

Page: 14 / 122

Operation with the Remote Control Unit
(continued)
4. Night Setback Mode
Night Setback Mode is used for saving energy.
Press the NIGHT SETBACK button while operation.
The
mark appears in the display.
To release the night setback function, press the NIGHT SETBACK button
again.
In Cooling Mode:
( )
5. Adjusting the Airflow
Direction
Confirm that the remote control unit has been turned on. Press the FLAP
button to start the flap moving up and down (
). If you want to stop
the flap movement and to direct the air in the desired direction, press
the FLAP button again.
CAUTION
Do not move the flap with your hands.
ON I /OFF
MODE
FLAP HH TIMER
SELECT
NIGHT
SETBACK
OFF ON
CLOCK
When the night setback mode is selected, the air conditioner
automatically raises the temperature setting 1 °C when 30 minutes
have passed after the selection was made, and then another 1 °C
after another 30 minutes have passed, regardless of the indoor
temperature when night setback was selected. This enables you to
save energy without sacrificing comfort. This function is convenient
when gentle cooling is needed.
Setting
temperature
Press the
NIGHT SETBACK
button
1 °C
1 °C
30 min. 30 min.
T ime
ON I /OFF
MODE
FLAP
FAN SPEED
SELECT
HH TIMER
SELECT
MM
TIME SET
NIGHT
SETBACK
BATTERIES
ACL A/C
SENSOR
OFF ON
CLOCK
14