CONTENTS
IMPORTANT: Please Read Before Starting
Special precaution
IMPORTANT:
Precautions for new refrigerant R 407 C installation
1.
GENERAL
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
3
1-1.
Tools required for Installation (not supplied)
1-2.
Type of copper Tube and Insulation Material
1-3.
Additional materials required for Installation (not supplied)
2.
INSTALLATION SITE SELECTION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
4
3.
DIMENSIONS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
5
4.
HOW TO INSTALL THE UNIT
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
6
4-1.
Suspending the Unit at the Ceiling
4-2.
Installation of the condensate drain pipe
4-3.
Duct for fresh air
5.
HOW TO INSTALL THE REMOTE CONTROLLER (OPTIONAL PART)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
8
5-1.
Operation controller installation
5-2.
Room temperature sensor setting
5-3.
Address switches
5-4.
Setting the model code (only for heat pump models)
5-5.
Test Run switch
5-6.
Misoperation Alarm Indicators (only for Heat Pump models)
5-7.
Wireless Remote controller Installation
5-8.
How to install batteries (only for Heat Pump models)
6.
HOW TO PROCESS TUBING (Only for PACKAGE outdoor units)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
12
6-1.
Tubing length
6-2.
Tubing size
6-3.
Installing Distribution Joint
6-4.
Optional Distribution Joint Kits
7.
ELECTRICAL WIRING (Only for PACKAGE outdoor units)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
14
7-1.
General Precautions on Wiring
7-2.
Recommended Wire Length and Wire Diameter for Power Supply System
7-3.
Wiring System Diagrams
8.
PCB SETTING (Only for PACKAGE outdoor units)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
20
8-1.
R.C. Address Setting Method
8-2.
Automatic Address Setting Method
8-3.
Displaying Indoor / Outdoor Unit Combination Numbers
8-4.
Test Run Procedure
EG
1
IMPORTANT
PLEASE READ BEFORE STARTING
This air conditioning system meets strict safety and operating standards. As the installer or service person, it is an important part
of your job to install or service the system so that it operates safely and efficiently.
For safe installation and trouble-free operation, you must:
• Carefully read this instruction booklet before beginning.
• Follow each installation or repair step exactly as shown.
• Observe all local, state, and national electrical codes.
• Pay close attention to all warning and caution notices given in this manual.
