IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed, including the following:
1.
Read all instructions.
2.
To protect against fire, electrical shock and injury to persons do not immerse
coffee grinder, cord or plugs in water or other liquid.
3.
This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not modify the plug in any way.
4.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
5.
Children should be supervised to ensure that they do not play with the
appliance. Close supervision is necessary when any appliance is used by or
near children.
6.
Unplug from outlet when not in use, before putting on or taking off parts and
before cleaning.
7.
Avoid contacting moving parts
8.
Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or has been damaged in any manner. Return
appliance to the nearest autorized service facility for examination, repair or
adjustment
9.
The use of accessory attachments not recommended by the appliance
manufacturer may result in fire, electric shock or injury of persons.
10.
Do not use outdoors.
11.
Do not let cord hang over edge of table or counter where it can be pulled on by
children, or touch hot surface
12.
Do not place on or near a hot gas or electric burner, or in a heated oven.
13.
To disconnect, turn any control to “off”, then remove plug from wall outlet.
14.
Do not use appliance for other than intended use.
15.
Always place the lid and receptacle in the right position as shown in the figure
on the next page.
16.
Unwrap the coffee grinder with care and remove all packaging materials
Keep the packaging (plastic bags and cardboeard) out of reach of children.
17.
SAVE THESE INSTRUCTIONS
Dangerous voltage
Important operating and
maintenance instructions
Technivorm-Moccamaster Coffee grinder KM4
1. hopper lid
2. hopper
3. push button switch
4. sieve
5. cutter blade
6. grinding chamber
7. receptacle
8. support
Directions for use
Installation of the coffee grinder
Place the grinder on a flat stable surface.
Find a place close to a plug-connection and leave sufficient space over grinder
(about 20 cm) to enable filling of the hopper.
Operating the Coffee grinder
The coffee grinder is only meant for grinding coffee beans
Before filling the hopper of the grinder with coffee beans remove cardboard jigs
from the grinder’s interior.
Check hopper for presence of foreign objects before using
Never add anything else to the beans as this may cause damage to the grinder.
To prevent overheating of the motor:
Don’t grind longer than 1 minute each time.
Always leave space between sieve bottom and ground coffee level.
