BEFORE YOU START THE ASSEMBLY, PLEASE READ THE FOLLOWING TIPS
AND WARNINGS.
❶
Do a quick inventory to
make sure the package
contains all the parts and
hardware listed in the
assembly instructions.
❷
Missing, damaged
and defective parts can
be replaced at no cost to
you. Please refer to the
last page in this manual.
❸
The replacement parts
service is limited to the 48
contiguous United States.
If you reside in Alaska,
Hawaii, Puerto Rico,
U.S. territories or other
countries, please contact
the supplier from where the
unit was purchased.
❹
If during assembly
you find an issue or
need clarification,
please contact our
Customer Service for
assistance. Please refer
to the last page in this
manual.
❺
On each step read
the instructions and
analyze the
illustrations thoroughly
before proceeding to
do the assembly.
❽
Do not overtighten
or force the screws as
they might break, strip,
damage the threads of
the holes or get stuck
inside the part.
❻
Make sure you
understand which hardware
will be used on each step.
Using the wrong size of
screw, bolt or pin might
strip the threads or cause
damage to the part in which
it is being used.
❼
To avoid misalignments,
always leave the screws
loose and tighten them until
all pieces are positioned
correctly.
❾
If the hole seems too big or too small for the
screw, first make sure you are using the correct
size of screw and that it’s been installed in the
correct hole. Test another of the same screw
into the same hole, as well as test the screw
onto different holes for the same part. If the
hole still appears to be too small, do not force
it, it needs replacing.
P.2
TS43, TS51, TS52, TS70, TS83, TS84, TS85, TS90,
TS92, TSF44, TSF71, TSXXL2
P.2