ASSEMBLY STEPS
Grab and extend each of the sliders
J
towards your
RIGHT
and separate
the small track from the rest by pressing
UP
firmly the locking lever, at
the same time that you pull the small track out. The big pieces
J-1
will be
used in the next step, while the small tracks
J-2
will be used until step
11, so please set them aside.
P.6
RTA-B018
P.6
Open the big sliders
J-1
and attach them to the top bar on the left frame
2
and the right frame
3
with screws
D
using a screwdriver (not included).
Screw at the
back hole
first (last hole), then it will be easier to find the
front hole through the openings.
(Front)
(Top)
(Front)
STEP 2
Hardware:
D
M6x20
4
Pcs
J-1
2
Pcs
(NOT INCLUDED)
J-1
Big pieces: Use on next step
Small tracks: Used until step 11
(Front)
2
3
J-1
Flush
pieces
(Top)
J
J-1
J-2
Open slider
towards the right
Push lever UP
Separate smaller rail
STEP 1
Hardware:
J
2
Pcs
Attach at
back first
