background image

 
In Auto Mode the programs are called up automatically in a continuous loop. 
Press the MODE button to select the AUTO Mode. Press the ENTER button to select the 
desired frequency of the loops. The desired frequency of the loops (Frequency = FQN 
01-99) can be selected using the UP/DOWN buttons. Please press the ENTER button to 
confirm and to exit the AUTO Mode. 

 

 

Slave Operation 

 
The master/slave operation enables that several LED bars can be synchronized and 
controlled by one master device. For slave operation to function, XLR data cables must 
be used to connect fixtures together. To set this mode, press the MODE button to select 
the SLAVE mode. Any devices set in this manner can now be controlled by the master 
unit. Press the ENTER button to confirm and to exit the SLAVE Mode. 

 

 

Sound Active Operation  

 
Press MODE button until you reach the SOUND controlling mode, then the fixture will 
respond to the sound of audio. Press UP/DOWN to adjust the sound sensitivity levels 
(SENS00-31) & frequency (FQN01-99) of loops. Press the ENTER button to select the 
desired sensitivity and frequency of the loops, respectively. Press the ENTER button 
again to confirm and to exit the SOUND Mode. 

 

 

DMX Operation  

 
The DMX operation mode allows you to control the bar using a standard DMX controller. 
In this mode you set the start address at which the fixture will respond to the controller 
on.  Also the channel assignment mode to be used is set here.  To address simply press 
the MODE button until the display shows DMX MODE. Press the ENTER button and the 
display shows: 001. Set the desired address using the UP/DOWN buttons. Please press 
the ENTER button again to confirm and to select a DMX Channel Mode. After having set 
the desired address and pressed ENTER, you can now choose a DMX Channel Mode 
from 6, 9, 15, 24, and 27. Set the desired mode using the UP/DOWN buttons. Press the 
ENTER button again to confirm and to exit the DMX Mode. 
 

Note:

 The following DMX-512 Control section explains how to select a DMX start 

address for your fixture. It also covers connecting data cables, proper termination, 
specific channel assignments and channel value tables. 

 
 
 
 
 

DMX-512 Control

 

 

8

Summary of Contents for UltraLED Series DL-BAR10TC24















Reviews: