background image

Built-in Program Chase Operation (P01-P14) 

A program is a sequence of different steps that will be called up one after another in a 
continuous loop. With the DL-BAR10TC24 fixture, you can select up to 14 different 
program chases. Each program is described in the table below. 

To select a program: 

Press the MODE button to select the internal PROGRAM Mode. Select the desired chase 
from P01 to P14 using the UP/DOWN buttons. Press the ENTER button to select speed 
and flash settings, respectively. You can select the desired values via the UP/DOWN 
buttons. Speed is from slowest 00 to fastest at 99. Set strobe flashing from none at 00 to 
fastest at 99. Press the ENTER button to confirm and to exit the STAND ALONE Mode. 

 
Note: 

Under programs P13 & P14, FLOW 8 and FLOW 9 there are 2 sub-

programs to choose from (C1, C2). Please press the ENTER button twice to reach 
the sub-programs. The desired color combinations can be selected using the 
UP/DOWN buttons. 

 
P1 STATIC COLOR 
BLACK-RGB  Strobe 00-99 

Blackout, Red-Yellow-Green-Cyan-Blue-Purple-White 
Strobe speed adjustable. 

P2 DREAM 
Speed 00-99  Strobe 00-99 

Seven color dreaming 
Speed & Strobe adjustable 

P3 METEOR 
Speed 00-99  Strobe 00-99 

Seven color flow 
Speed & Strobe adjustable 

P4 FADE 
Speed 00-99  Strobe 00-99 

Seven color fade 
Speed & Strobe adjustable 

P5 CHANGE 
Speed 00-99  Strobe 00-99 

Seven color change 
Speed & Strobe adjustable 

P6 FLOW 1 
Speed 00-99  Strobe 00-99 

Seven color chase in 1 direction 
Speed & Strobe adjustable 

P7 FLOW 2 
Speed 00-99  Strobe 00-99 

Seven color chase in 2 directions 
Speed & Strobe adjustable 

P8 FLOW 3 
Speed 00-99  Strobe 00-99 

Seven color relay chase in 1 direction 
Speed & Strobe adjustable 

P9 FLOW 4 
Speed 00-99  Strobe 00-99 

Seven color relay chase in 2 direction 
Speed & Strobe adjustable 

P10 FLOW 5 
Speed 00-99  Strobe 00-99 

Seven color chase from two sides to middle 
Speed & Strobe adjustable 

P11 FLOW 6 
Speed 00-99  Strobe 00-99 

Seven color chase from middle to two sides 
Speed & Strobe adjustable 

P12 FLOW 7 
Speed 00-99  Strobe 00-99 

Seven color chase  
Speed & Strobe adjustable 

P13 FLOW 8 
Speed 00-99  Strobe 00-99 
1.BLACK-RGB  2. BLACK-RGB 

Two color chase in 1 direction 
Speed & Strobe adjustable 
Blackout-Red-Yellow-Green-Cyan-Blue-Purple-White 

P14 FLOW 9 
Speed 00-99  Strobe 00-99 
1.BLACK-RGB  2. BLACK-RGB 

Two color chase in 2 directions 
Speed & Strobe adjustable 
Blackout-Red-Yellow-Green-Cyan-Blue-Purple-White 

 

Auto Run Operation 

 

7

Summary of Contents for UltraLED Series DL-BAR10TC24















Reviews: