▪
4 working modes: Auto, Sound, DMX, Master/Slave
▪
DMX control using 6 channels per port
▪
12 output ports and each port can be addressed individually
▪
18 preset 6 built-in programs with variable dimmer and speed
▪
Software updateable via USB port
▪
LCD digital display menu for all settings
▪
Sound activation accessible via DMX
▪
Linkable via Master/Slave
▪
Both 3 and 5 pin XLRs In/Out for DMX control
▪
Rack mounted
DL-ULEDDRIVER12R is a 12 output power and control unit for the UltraLED series range of
products. It is compact and and easy to use. Please read this user guide thoroughly before
operation. Proper use and care of this product will prolong the life of this device.
INTRODUCTION
PRODUCT VIEW
FEATURES
4
▪
Ensure that unit is properly grounded.
▪
Please keep this User Guide for future consultation.
▪
Always make sure that you are connecting to the proper voltage and that the line voltage you
are connecting to is not higher than that stated on decal or rear panel of the unit.
▪
To prevent risk of fire or shock, do not expose unit to rain or moisture.
▪
The unit must be installed in a location with adequate ventilation, at least 5cm from adjacent
surfaces. Be sure no ventilation slots are blocked.
▪
Always disconnect from power before servicing or replacing fuse.
▪
Make sure power cord is never crimped or damaged.
On/Off
USB
Control Display
Port: 1-8
Port: 9-12 DMX In/Out
Power Fuse
Voltage
Selector
SETUP
Installation
Always consult a qualified professional when installing. This unit is designed for rack mount. Do
not install the unit in a place where the unit will be exposed to rain, high humidity or extreme
temperature changes. This unit is for dry / indoor use only.
The unit must be installed in a well ventilated rack leaving the vents free of any air flow obstructions
