2
3.
Never touch new lamps with your fingers: use a tissue or a cloth.
In order to replace the lamp, disconnect from main power supply first, and unscrew the lamp replacement cover. Only
use the appropriately rated lamps as use of any other lamp type many cause the unit to be non-operational.
Due to the nature of the mercury vapor discharge lamp it is vitally important that you do not touch the new replacement
lamp with your bare fingers, as this will reduce lamp life considerably. Once again a clean tissue or cloth can be used for
fitting the replacement lamp. After replacement of the lamp, if the unit is still not working then please contact your local
dealer or our company for assistance.
CLEANING
The most important part of maintaining lighting fixture is to keep it clean. By keeping the reflector clean, it will allow
more light to be transmitted & projected forward, thus producing a better UV effect and cooler operation. This should be
cleaned with a soft damp cloth. The body of the unit may also be cleaned in the same way. Make sure all vents are free
of debris and ventilation obstructed in any way. Any internal cleaning should be performed by a fully qualified
technician.
MAINTENANCE & SERVICING
Any work on internal parts should be carried out by a qualified technician only. Removal of covers other than the front
to replace lamp is considered a breach of warranty and will not be covered under any such agreement unless authorized
first by our company.
TROUBLESHOOTING
•
If the unit is not functional-check main power supply is ‘on’ and at the correct voltage.
•
If the unit is functional but lamp does not light, lamp may require replacing.
•
If the unit lights up but it not very bright, lamp maybe very old and requires replacement or unit is not receiving
proper voltages. Make sure unit is not plugged into any dimming device.
POWER CONNECTIONS
The unit is supplied with an Edison power plug appropriate to its voltage. Should any other connections be required they
must be carried out with the following configuration.
Earth = Green/Yellow cable
Common/Neutral = Blue cable
Hot/Live = Brown cable
In the USA & Europe, it is required that all plugs are 3-pin type i.e. with Earth/Ground connection.
In the UK, it is required that all mains plugs are fitted with 5A fuses.
TECHNICAL SPECIFICATIONS
Power:
120V~60Hz AC
Fuse:
5A/125V
Lamp:
LH125BL-T 125W(E27)
Dimensions: 216x254x254mm
Weight:
7.7KG
Warranty:
Limited 90-day warranty
