5 Hardware
5.1 Front view
Two LEDS are visible on the front of the unit. The left LED will illuminate green when the unit is powered on and
running; it will extinguish when it is no longer running. The right LED will illuminate red when the unit is being charged
and will switch off when charging is complete.
The power switch can be found on the right-hand side of the unit. Pressing this once briefly will power up the t-box.
The unit can also be shut down via this button by pressing and holding for eight seconds.
In the event that the device becomes unresponsive whilst it is running, the t-box can be reset by pressing the power
switch five times, approximately once per second. Do not hold the button inbetween presses – press briefly each time.
The device must be powered on and running in order to be reset.
The top of the unit features a lanyard attachment loop.
Underneath is a pair of micro USB ports. The port labelled ‘AMP’ is for connecting to the amplifier’s control module
and the other, labelled ‘CHG’ is for charging.
Power LED
Lanyard/fixing loop
Charge indication LED
Power button
Micro USB ports
Technetix Group Limited
3
