1 Safety
The device contains a 3.7 V 2600 mAh Lithium-Ion battery which must be charged in accordance with these
instructions using the cable accessories provided with the t-box. The device should be charged using USB 1.0 or 2.0
compliant equipment.
When using the t-box at height please ensure that the device is secured effectively via the lanyard loop.
The USB cable provided should not be used to support/hold the device in place.
Technetix does not accept responsibility for product failures that occur due to t-box being used in a manner
that contradicts these instructions.
2 Introduction
The t-box is a small, portable Wi-Fi configuration unit that allows you to configure DBx nodes and amplifiers via your
smartphone, tablet or laptop. The rechargeable device can run back-ups and deploy templates alongside the ability
to fine tune settings on touch and non-touchscreen devices. It features a splash-proof casing to ensure protection
against water and dust ingress. It’s durable and practical for use in the field, with sufficient wireless range to allow
engineers to configure the DBx from the comfort of their vehicle.
3 Requirements
■
Mobile device, PC or Mac
■
USB charger, 5 Volts, minimum 1 Amp
■
Wireless capabilities
Recommended web browsers:
■
Google Chrome
■
Mozilla Firefox
■
Microsoft Edge or Internet Explorer 11
■
MacOS or iOS Safari
WARNING
Please ensure you follow these instructions when using the t-box.
Operating temperature
0˚C to +45˚C
*Storage temperature
-25˚C to +60˚C
Notes
* For optimum charging, keep out of sunlight during recharging process
Technetix Group Limited
1
