AIMA3000.EDFA Product User Manual
Technetix Group Limited
•
technetix.com
May/2016 - Version 1.0
30
Detailed operations:
Click “Modules” tab and click the module to be configured as shown in Figure 6-2. Click the “Apply” button under “Factory
Defaults”. When finished, the device configuration will be reset. For more detailed information, refer to the factory restore
and upgrade configuration parameter table shown in
Table 6-3.
Note:
All the powers displayed on the web page are total power.
Table 6-3 Factory default and upgrade configuration parameters table
Parameters
Configuration
Factory default value
After software upgrade
Alarm Detection Control
ON / OFF
ON
Retained
Unit Control (PUMP ON / OFF)
ON / OFF
OFF
Retained
Output Gain Type
Constant Power / Constant
Gain
Constant Power (EDFA-x-x-P)
and Constant Gain
(EDFA-x-x-G)
Retained
Output Status Alarm
Major/Minor/Disable
Minor
Retained
Gain Per Wavelength
8-12
6
Retained
FIGURE 6-2
