Loop recording
If the memory card is full, the first videos will be deleted automatically and
recording will be continued.
Connecting with PC
Set switch 1 in middle, connect it with PC using USB cable.
Then set switch 1 to OFF and camera will be recognized as a removable
Disk Drive. If the device is not read by PC, charge the batteries then
reconnect.
Reset
The reset button on the front of the device will reset time, date and set alarm
clock. Press and hold it until a countdown occurs. After reset you need to set
time, date and alarm clock again.
If the video/photo is stuck or not working properly:
set the switch 1 to OFF
and wait for about 1 minute;
take out the batteries. After one minute
reinstall them.
Set Date & Time stamp
The date and time will be changed for video or photo in next recording.
Insert a MicroSD card and set switch 1 to OFF.
Connect the device with PC using MicroUSB cable.
Go to <<My Computer>>, find the CD drive called Date/Time Set and
double left click on it.
A folder will open. According to your computer system, Mac OS or
Windows double left click on the corresponding folder.
Double left click on DSC Clock and then click on Time
synchronization.
Right click on the device to eject the CD drive and the storage
from your Windows PC. Under MacOS put the CD drive and the storage into
trash to eject it.
The device now has the current date and the current time.
