5. HOW TO PLAY VINYL RECORDS
(5.1.)
Press and hold the power key (15) for about 3 seconds. The LED
light changes from red into green.
(5.2.)
Place a vinyl record on platter and select a speed (33 or 45 RPM). If you select
45 speed, then use the included 45 RPM adapter.
(5.3.)
Undo the tone arm clip. Use the Raise/Lower Lever to raise the tone arm, and
then move it over to the record. Lower the tone arm onto record. The record begins
playing.
(5.4.)
Adjust the volume with
VOL–
key (10) or
VOL+
key (12). Press long the VOL–
key to decrease the volume. Press long the VOL+ key to increase the volume.
(5.5.)
When finished, raise the tone arm and return it to rest on the tone arm clip.
6. HOW TO RECORD ON A USB FLASH DRIVE
(6.1.)
Connect a USB flash drive to the front USB port. The device plays songs from
the USB immediately.
(6.2.)
By pressing the
SOURCE
key (14) you can shift from USB flash drive to LP
playing.
(6.3.)
To start recording, press the
REC
key (13). The LED light will flash RED,
indicating that the device is recording.
(6.4.)
To stop recording, press again the
REC
key (13). The recorded song recorded
will be played immediately.
7. PLAYING DIRECTLY FROM USB
(7.1.)
Be sure power is on
, insert USB flash disk with MP3 music files into USB port.
(7.2.)
When the
LED light
(17) is flashing GREEN, the device plays songs from the
USB flash drive. If the LED light is RED, press and hold the Power key (15) for about 3
seconds. Then the LED light will change from RED to flashing GREEN.
(7.3.)
The device supports for MP3 formats. During play status,
press PLAY/PAUSE
key (12) once to halt playing, press it again to continue.
