4.
PHONO OPERATION
(4.1.)
Press the Function switch to
PHONO position
.
Then put a record on the Platter lightly.
In certain circumstances, 45 RPM adapter is needed.
(4.2.)
Select the speed of record:
33 1/3 and 45
RPM according to record size.
(4.3.)
Remove the stylus guard and push the lift lever upward
to raise the tone
arm from the arm park, and then move the cartridge holder over the record gently, now
the platter will run automatically (default set of Auto/Manual; Stop-Switch at ON
position ). Then put down the lever, the tone arm would drop and touch record surface
gently. Now users can enjoy their favorite songs.
(4.4.) Select the auto/manual stop control:
The turntable will stop automatically
while the song on the record finished when the switch at ON position. The other side it
will always play when it is at OFF position, this may helps to play some long recorded
vinyl which can not be played to the end by normal way.
(4.5.)
Adjust the volume with
VOL–
key (10) or
VOL+
key (12). Press long the VOL–
key to decrease the volume. Press long the VOL+ key to increase the volume.
(4.6.)
Push the arm lift lever up to raise the arm
, now platter will still running but
play will pause. To continue the play, user just need to put down the lever.
(4.7.)
Record Vinyl:
Firstly insert memory device (USB flash disk). When turntable is
working, press the
REC
key (13) on front control board of the unit, now recording
works will begin. To stop recording, press again the
REC
key (13).
NOTE 1:
When you insert a USB flash disk, the recorded file will be saved into
the latter inserting device.
NOTE 2:
Recorded file in MP3 format with 128bit.
