4
TX-199, 5008, 09/22
Prduct overview
1 Power on / off device / LED
2 USB 5V / 1A output
3 Solar panel input 9V
4 Indicator LED
5 AC input 110V – 220V
6 Output LED bulbs
7 LED light
First use
Charge the battery with the AC charging cable by plugging it into the power station (5)
and a 110V-230V 50-60Hz AC outlet until the indicator LED (4) turns solid green. This
may take approximately 6-9 hours.
LED indicator light
The indicator LED (4) of the device shows the charging status of the device according:
Green steady light
Fully charged
Green slow flashing light
Sufficient battery
Orange slow flashing light
Low battery
Red slow flashing light
Power off soon
LED front panel
The power button (1) activates the LED front light (7) in different brightness modes
depending on how many times the power button is pressed, as follows:
1. Low brightness
2. Medium brightness
3. High brightness
4. Slight brightness
5.Turn off
LED light bulb system
Plug the cable of the three LED light bulbs into the LED bulb output (6) at the device
to power them. Each light bulb can be turned on and off separately with the switch at
the power cord of the bulb.
1
2
3
4
5
6
7