⑤
USB charging connectors: (1) 5V / 1A & (2) 5V / 2.1A
⑥
Cathode connector
⑦
Anode connector
Charging
Before first use, fully load the battery of the BT-X25 by plugging the
device into the included car charger. The built-in magnet holds the
In-Ear Headset in place. The RED LED shines bright while charging.
When the In-Ear Headset is fully charged, the RED LED turns off.
Bluetooth pairing
Turn on the BT-X25 by pressing the
①
On/Off button. BLUE and
RED indicator are slowly flashing alternately. To enter Bluetooth
pairing mode, keep pressing the button after the BT-X25 is turned on.
The Bluetooth pairing mode is shown by the quickly flashing BLUE
and RED LED.
If the In-Ear Headset fails to connect and search the device
name ”Technaxx BT-X25” on your Bluetooth device. After pairing
successfully, the BLUE LED lights solid. When the In-Ear Headset is
connected with your Smartphone and there is an incoming call, you
can press the
①
On/Off button once to receive calls. To end the
calls press the
①
On/Off button again.
