4. FM / AM OPERATION
(4.1.) Set FUNCTION switch to TUNER mode, then choose needed band (AM, FM
and FM stereo) by BAND switch.
(4.2.) Search stations: Rotate the TUNER knob to choose request station, or press
PREV/NEXT keys to choose idea stations. User can also press one of the two keys a
little longer around 1.5s then the model will search automatically and it would stop at a
clearest station.
(4.3.) Record Radio: Firstly insert memory device (USB flash disk or SD /MMC card).
When Radio is working, press the REC key on front control board of the unit, now
recording works will begin. To finish the work just need to press the STOP key.
NOTE: When you insert both USB flash disk and SD Card, the recorded file will
be saved into the latter inserting device.
5. PHONO OPERATION
(5.1.) Press the Function switch to PHONO position. Then
put a record on the Platter lightly.
In certain circumstances, 45 RPM adapter is needed.
(5.2.) Select the speed of record: 33 1/3, 45, 78 RPM according to vinyl to played.
(5.3.) Remove the stylus guard and push the lift lever upward to raise the tone
arm from the arm park, and then move the cartridge holder over the record gently, now
the platter will run automatically (default set of Auto/Manual stop switch at ON
position ). Then put down the lever, the tone arm would drop and touch record surface
gently. Now users can enjoy their favorite sons.
(5.4.) Select the auto/manual stop control: The turntable will stop automatically
while the song on the record finished when the switch at ON position. The other side it
will always play when it is at OFF position, this may helps to play some long recorded
vinyl which can not be played to the end by normal way.
(5.5.) Rotate the volume control knob to get desired sound level.
(5.6.) Push the arm lift lever up to raise the arm, now platter will still running but
play will pause. To continue the play, user just need to put down the lever.
(5.7.) Record Vinyl: Firstly insert memory device (USB flash disk or SD/MMC card).
When turntable is working, press the REC key on front control board of the unit, now
recording works will begin. To finish the work just need to press the STOP key.